Trench mesh incuded Triangle-Mesh Reinforcement,Ladder-Mesh Reinforcement. Greatly reduces cracking that can arise from thermal stresses. This enhances resistance to water penetration, as cracks are controlled. Increases elasticity and performance of masonry walls under various stresses Buttwelding of cross rods to longitudinal rods (not more than 16This construction enhances bonding capabilities, eliminates projection of cross rods beyond the specified width of reinforcement, and prevents excessive build up of wire in limited mortar joints Continuous deformation along each longitudinal rod for superior bonding performance It has the continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls. Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction.
Ref No. | Length m | Width m | Longitudinal Wires mm | Cross Wires mm | Mass Kg |
L8TM200 | 6.0 | 0.2 | 7.6 @ 100 | 4.77 @ 300 | 7 |
L8TM300 | 6.0 | 0.3 | 7.6 @ 100 | 4.77 @ 300 | 9 |
L8TM400 | 6.0 | 0.4 | 7.6 @ 100 | 4.77 @ 300 | 12 |
L8TM500 | 6.0 | 0.5 | 7.6 @ 100 | 4.77 @ 300 | 14 |
L11TM200 | 6.0 | 0.2 | 10.7 @ 100 | 4.77 @ 300 | 13 |
L11TM300 | 6.0 | 0.3 | 10.7 @ 100 | 4.77 @ 300 | 18 |
L11TM400 | 6.0 | 0.4 | 10.7 @ 100 | 4.77 @ 300 | 22 |
L11TM500 | 6.0 | 0.5 | 10.7 @ 100 | 4.77 @ 300 | 27 |
L12TM200 | 6.0 | 0.2 | 11.9 @ 100 | 4.77 @ 300 | 16 |
L12TM300 | 6.0 | 0.3 | 11.9 @ 100 | 4.77 @ 300 | 22 |
L12TM400 | 6.0 | 0.4 | 11.9 @ 100 | 4.77 @ 300 | 27 |
L12TM500 | 6.0 | 0.5 | 11.9 @ 100 | 4.77 @ 300 | 33 |
Contact us if you need more details on Trench Mesh. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Welded Trench Mesh、Fabric Mesh Reinforcement. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Reinforcing steel mesh