Hot dipped galvanizing
Steel Grating 1) Bearing Bar (Load Bar) Specifications (mm): The specification of plain type and serrated type bearing bar is 20 x 3 to 100 x 10;the specification of I-section type is 25 x 5 x 3, 32 x 5 x 3, 38 x 5 x 3, 40 x 5 x 3, 50 x 5 x 3, 50 x 7 x 4, 55 x 7 x 4, 60 x 7 x 4, 65 x 7 x 4, 70 x 7 x 4, 75 x 7 x 4, etc. 2) Bearing Bar Pitch (center to center): 12.5, 15,25, 30, 30.16, 32.5, 34, 40, 41.25, 45, 50, 60, 60.32, 80, 100 mm etc, also be according to client's requirement and 30, 40, 60mm are recommended, America standard is available <1'' x 3/16'', 1 1/4'' x 3/16'', 1-1/2'' x 3/16'', 1'' x 1/4'', 1-1/4'' x 1/4'', 1 1/2'' x 1/4''(19-w-4),(19-w-2) and so on.> 3) Cross Bar Pitch (center to center): 38, 50, 76, 100, 101.6mm etc, also be according to client's requirement and 50, 100mm are recommended, America standard is available. 4) Material: Mild Steel (Low Carbon Steel) or Stainless Steel 5) Surface Treatment: Untreated, Painting or Hot dip Galvanizing 6) Steel grating standards: A) China: YB/T4001-1998 B) USA: ANSI/NAAMM (MBG531-88) C) UK: BS4592-1987 D) Australia: AS1657-1985
Type | Welded steel grating, pressure-locked, socket-welding |
Steel flat size | 20×3,25×3,25×5,30×3,30×4,30×5,32×3,32×5……45×5mm |
Beraing bar pitch | 12.5,15,20,25,30,35,40,50mm |
Cross bar pitch | 38,50,80,100mm |
material | Low carbon steel, stainless steel, aluminium |
Surface treatment | Untreated, hot galvanized, painted |
Standards | China: YB/T 4001.1-2007 USA: ANSI/NAAMM(MBG531-88) UK: BS4592-1987 Australia: AS 1657-1985 |
Contact us if you need more details on Steel Grating. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Galvanizing Steel Grating、Hot Dipped Galvanizing Steel Grating. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Wire Mesh Fence > Frame fence